ANALISIS PERPINDAHAN PANAS KIT TAMBAL BAN PORTABLE TERHADAP VARIASI WAKTU PENAMBALAN
DOI:
https://doi.org/10.36499/jim.v21i1.14152Keywords:
sepeda motor, tambal ban portabel, elemen pemanas, perpindahan panasAbstract
Motorcycles are the primary mode of transportation in Indonesia, with a total of 125,305,332 units recorded in 2022 according to the Central Bureau of Statistics. One of the common problems faced by riders is tire leakage, which can disrupt travel. This study aims to design a portable tire patching tool based on a heating element, utilizing a piston pump mechanism and powered by a motorcycle battery, compactly assembled to fit within the motorcycle’s luggage compartment. The research method employed is experimental, using a thermal imaging device to determine the optimal temperature range for melting the tire patch rubber. The results show that 2 minutes of heating produces a bonding strength of 45.7 Psi. Starting from an ambient temperature of 30 °C, the heating plate reached 139.5 °C, while the tire surface reached 118.3 °C. The total heat transfer energy generated was 3,845,356.8 Joules. The resulting patch adhesion effectiveness reached 70.4%. This tool is considered effective for use in areas with limited access to tire repair services and can be operated directly by riders to reduce the risk of unexpected expenses during travel.
References
Anggriawan, D.J., Andrasto, T., 2014. Website Toko Online yang Terintegrasi dengan SMS Gateway Sebagai Sarana Penunjang Penjualan pada Toko Online Djokjha Shop. jurnal Edu Komputika 1, 1–11.
Aprilia, Bi. putra, 2015. Studi Perencanaan Pompa Air Tenaga Angin Untuk Suplesi Irigasi Di Desa Yosomulyo Kecamatan Gambrian Kabupaten Banyuwangi. Jurnal Teknik Pengairan 1, 1–5.
Ariestanto, D., Abdullah, D., Wijaya, A., 2025. Implementasi Location Based Service Dalam Perancangan Aplikasi Pencarian Lokasi Tambal Ban Di Kota Bengkulu. Jurnal Media Infotama 21, 357.
Ashari, A., Ana, M., Efan, A., 2016. Analisis Perpindahan Panas Pada Alat Tambal Ban Elektrik. Jurnal Kajian Ilmiah dan Teknologi Teknik Mesin 1, 37–42.
BPS, 2024. Perkembangan Jumlah Kendaraan Bermotor Menurut Jenis.
Damanik, A.P., Alda, M., Azzahra Batubara, A., Ramadhan, M.R., 2024. PERANCANGAN PROTOTYPING APLIKASI TAMBAL BAN ONLINE (NAMBAL) BERBASIS MOBILE. Jurnal Ilmiah Sains dan Teknologi 8.
Kasmuri, 2009. Analisa Pompa Piston Pada Kincir Angin MB 12-7. Universitas Mercu Buana.
Khamida, N., 2016. Peningkatan Keterampilan Otomotif Tambal Ban Melalui Metode Latihan Pada Siswa Tunagrahita Ringan Kelas X Di SLB Negeri 1 Sleman. Universitas Negeri Yogjakarta.
Khudzaeva, E., Asnadi, M.Nu., 2023. ANALISIS USABILITY APLIKASI BRIMO DENGAN MENGGUNAKAN METODE KUESIONER DAN MODEL DELONE&MCLEAN. Jurnal Perangkat Lunak 5.
Kreith, F., 1997. Prinsip-prinsip Perpindahan Panas, 3rd ed. Erlangga, Jakarta.
Kurniawan, F.A., 2013. Tambal Ban Menggunakan Aki 12 V. Universitas Muhamadiyah Yogjakarta.
Muchlis, A.F., 2023. Metode Penelitian Survei-Kuesioner untuk Kesesakan dan Privasi pada Hunian Asrama. Jurnal Lingkungan Binaan Indonesia 12, 154–163. https://doi.org/10.32315/jlbi.v12i3.252
Muh Ali, A., Satriawati, S., Nur, R., 2023. Meningkatkan Hasil Belajar IPA Menggunakan Metode Eksperimen Kelas VI Sekolah Dasar. PTK: Jurnal Tindakan Kelas 3, 114–121. https://doi.org/10.53624/ptk.v3i2.150
Putra, riski mandala, 2015. Perencanaan Sistem Timer Pada Alat Tambal Ban Elektrik. Universitas Muhamadiyah Ponegoro.
Putra, P.R., Pembangunan Nasional Veteran Jawa Timur Jl Rungkut Madya No, U., Anyar, G., Gn Anyar, K., Sby, K., Timur, J., n.d. Juminten Jurnal Manajemen Industri dan Teknologi Perancangan Alat Tambal Ban Dengan Menggunakan Metode Design For Manufacturing And Assembly (DFMA) Designing a Tire Patch Tool Using the Design For Manufacturing And Assem-bly (DFMA) Method. https://doi.org/10.33005/juminten.v4i1.647
Saoqibillah, L., Malik, A., 2024. Analisis Pengaruh Suhu Terhadap Nilai Konduktivitas Pada Perpindahan Panas Secara Konduksi Menggunakan Virtual Lab Amrita. Jurnal Penelitian dan Pembelajaran Fisika Indonesia 6. https://doi.org/10.29303/jppfi.v6i1.256
Soegihardjo, O., Sukwanputra, F.Y., 2003. Uji Unjuk Kerja Pompa Pedal Multi Piston. Jurnal Teknik Mesin 5, 70–74.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
The journal allow the authors to hold the copyright without restrictions and allow the authors to retain publishing rights without restrictions.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution 4.0 International License.
