Analisis Sistem Instalasi Kelistrikan pada Swiss-Belhotel Makassar dengan Menggunakan Program ETAP
DOI:
https://doi.org/10.36499/jim.v21i1.13294Keywords:
Electrical evaluation, Swiss-Belhotel Makassar, ETAP, electric power system, load analysisAbstract
Swiss-Belhotel Makassar as a five-star hotel requires a reliable electrical installation system to support operations and customer comfort. Electrical system evaluation is important to ensure that system performance remains optimal, safe, and meets standards. This study aims to analyze and evaluate the existing condition of the electrical installation at Swiss-Belhotel Makassar using the Electrical Transient Analyzer Program (ETAP) software. The methods used include primary and secondary data collection, single line diagram system modeling, and short circuit current simulation and load analysis. The evaluation results show that there are several system components that are approaching their maximum capacity limits, as well as load imbalances between phases that need to be corrected to avoid potential disruptions and low energy efficiency. By using ETAP simulation, technical recommendations are prepared such as protection adjustments, load balancing, and system configuration improvements. This evaluation provides an important overview in efforts to improve the reliability and safety of the hotel's electrical system as a whole.
References
B. Udara, I. G. Ngurah, R. Bali, I. W. Sutama, and D. Candra, (2023) “Analisis Perbaikan Faktor Daya Pada Tranformator 2500KVA / 400V di,” vol. 6.
M. Arriski, (2020). Anal. efisiensi Mot. induksi 380V 3 phasa Pada PHOSTHATE FEDD PUM di PT. Pertamina III.
M. Digo, U. Situmeang, and Z. Elvira, (2022). “Analisis Kinerja Motor Induksi 3 Phasa Pada Screw Press,” J. Sain, Energi, Teknol. Ind., vol. 6, no. 2.
Pardamean Sinurat, dkk (2017). “Analisis Karakteristik Sistem Tenaga Listrik Saat Manuver Dengan Simulasielectrical Transient Analysis Program (ETAP)”, Jurusan Teknik Elektro, Fakultas Teknologi Industri Institut Teknologi Medan.
Sylvia Oktobella, Bambang Anggoro, Waluyo. (2015). Studi Karakteristik Nilai Impedansi Riil dan Imajiner Impedansi Pentanahan Konfigurasi Vertikal dengan Variasi Diameter dan Diinjeksi Arus Bolak-Balik Berfrekuensi 50 Hz -2 MHz. Jurnal Online Institut Teknologi Nasional. Vol.3 No.3.
Samsurizal, Muhammad Awaluddin, Septianisa Azzahra, Nurmiati Pasra, Andi Makkulau. 2024. Pemantauan dan Kontrol Otomatis Efisiensi Sel Surya melalui Simulasi Solar Tracker dengan Mikrokontroler. Fakultas Ketenagalistrikan dan Energi Terbarukan, Institut Teknologi PLN Jakarta, Vol. 18. No. 03.
Direktorat Jenderal Ketenagalistrikan. (2000). Persyaratan Umum Instalasi Listrik (PUIL 2000). Jakarta: Departemen Energi dan Sumber Daya Mineral Republik Indonesia.
Prih Sumardjati, dkk., (2020) Teknik Pemanfaatan Tenaga Listrik Jilid 3 Hal. 408. Vol. 6.
Imron Ridzki, dkk., (2022). “Analisisperbandingan tipe belitan terhadap nilai parameter motor induksi satu fasa”. Jurusan Teknik Elektro, PoliteknikNegeri Malang, Indonesia., Vol.20, no.1
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
The journal allow the authors to hold the copyright without restrictions and allow the authors to retain publishing rights without restrictions.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

This work is licensed under a Creative Commons Attribution 4.0 International License.







