Article Sidebar

Accepted
27 June 2024
Published
30 April 2024
Download
Untitled (Bahasa Indonesia)
Statistic
Read Counter : 195

Main Article Content

Abstract

Penelitian ini mengembangkan sistem aliran air efisien menggunakan sambungan T pipa PLA dan teknologi piston cairan terkompresi untuk mengatur tekanan. Konfigurasi ini mencakup dua saluran masuk: satu sejajar dengan saluran keluar dan satu lagi miring pada sudut 45 derajat. Prinsip tekanan hidrostatis memainkan peran kunci dalam meningkatkan kecepatan dan konsistensi aliran air. Metode penelitian melibatkan pengaturan kondisi pada berbagai inlet dan outlet, dengan fokus pada pengaturan tekanan dan kecepatan aliran. Hasil menunjukkan peningkatan kecepatan aliran hingga 50.2 m/s dan tekanan maksimum 466.15 kPa, yang menunjukkan distribusi tekanan yang merata dan respons sistem yang stabil terhadap perubahan input. Implementasi strategi pengaturan dan algoritma penjadwalan kompresor efektif dalam mencapai kinerja hidraulik optimal, memungkinkan pengelolaan aliran air yang stabil dan efisien.

Article Details

How to Cite
Khoeron, S., Wahid, M. A., Sutono, S. B., Hudaya, A. Z., Wibowo, R., & Tanaka, I. R. (2024). Optimasi Kinerja Hidraulik pada Sistem Aliran Air dengan Teknologi T-Joint Pipa PLA dan Piston Cair Terkompresi. Jurnal Ilmiah Momentum, 20(1), 56–63. https://doi.org/10.36499/jim.v20i1.11195
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Ahmad, N. N., Ghazali, N. N., Abdul Rani, A. T., Othman, M. H., Kee, C. C., Jiwanti, P. K., Rodríguez-Gómez, A., & Wong, Y. H. (2023). Finger-Actuated Micropump of Constant Flow Rate without Backflow. In Micromachines (Vol. 14, Issue 4). https://doi.org/10.3390/mi14040881
  2. Alamirew, T., Balaji, V., & Gabbeye, N. (2017). Comparison of PID controller with model predictive controller for milk pasteurization process. Bulletin of Electrical Engineering and Informatics, 6(1), 24–35. https://doi.org/10.11591/eei.v6i1.575
  3. Andino, M. Y., Lin, J. C., Roman, S., Graff, E. C., Gharib, M., Whalen, E. A., & Wygnanski, I. J. (2019). Active Flow Control on Vertical Tail Models. AIAA Journal, 57(8), 3322–3338. https://doi.org/10.2514/1.J057876
  4. Cox, R., Salonitis, K., Rebrov, E., & Impey, S. A. (2022). Revisiting the Effect of U-Bends, Flow Parameters, and Feasibility for Scale-Up on Residence Time Distribution Curves for a Continuous Bioprocessing Oscillatory Baffled Flow Reactor. Industrial & Engineering Chemistry Research, 61(30), 11181–11196. https://doi.org/10.1021/acs.iecr.2c00822
  5. Crowe, C. T. (2010). Engineering Fluid Mechanics 9th Edition Binder Ready Version with Binder Ready Survey Flyer Set. John Wiley & Sons, Incorporated. https://books.google.co.id/books?id=g0qiuAAACAAJ
  6. Davoodi, S., Al-Shargabi, M., Wood, D. A., Rukavishnikov, V. S., & Minaev, K. M. (2024). Synthetic polymers: A review of applications in drilling fluids. Petroleum Science, 21(1), 475–518. https://doi.org/https://doi.org/10.1016/j.petsci.2023.08.015
  7. Debuysschère, R., Siconolfi, L., Rimez, B., Gallaire, F., & Scheid, B. (2021). Influence of the inlet velocity profile on the flow stability in a symmetric channel expansion. Journal of Fluid Mechanics, 909, A13. https://doi.org/DOI: 10.1017/jfm.2020.912
  8. Engeda, A., Kim, Y., Aungier, R., & Direnzi, G. (2003). The Inlet Flow Structure of a Centrifugal Compressor Stage and Its Influence on the Compressor Performance . Journal of Fluids Engineering, 125(5), 779–785. https://doi.org/10.1115/1.1601255
  9. Granger, R. A. (2012). Fluid Mechanics. Dover Publications. https://books.google.co.id/books?id=VWG8AQAAQBAJ
  10. Hansen, L. D., Veng, M., & Durdevic, P. (2021). Compressor Scheduling and Pressure Control for an Alternating Aeration Activated Sludge Process—A Simulation Study Validated on Plant Data. In Water (Vol. 13, Issue 8). https://doi.org/10.3390/w13081037
  11. Lampunio, L., Duan, Y., Eaton, M. D., & Bluck, M. J. (2022). Mean Flow, Turbulent Structures, and SPOD Analysis of Thermal Mixing in a T-Junction with Variation of the Inlet Flow Profile. In Energies (Vol. 15, Issue 22). https://doi.org/10.3390/en15228415
  12. Lu, K., Sultan, I. A., & Phung, T. H. (2023). A Literature Review of the Positive Displacement Compressor: Current Challenges and Future Opportunities. In Energies (Vol. 16, Issue 20). https://doi.org/10.3390/en16207035
  13. Parsi, M., Kara, M., Agrawal, M., Kesana, N., Jatale, A., Sharma, P., & Shirazi, S. (2017). CFD simulation of sand particle erosion under multiphase flow conditions. Wear, 376–377, 1176–1184. https://doi.org/https://doi.org/10.1016/j.wear.2016.12.021
  14. Saghi, H. (2016). The pressure distribution on the rectangular and trapezoidal storage tanks’ perimeters due to liquid sloshing phenomenon. International Journal of Naval Architecture and Ocean Engineering, 8(2), 153–168. https://doi.org/https://doi.org/10.1016/j.ijnaoe.2015.12.001
  15. Shaheed, R., Yan, X., & Mohammadian, A. (2021). Review and Comparison of Numerical Simulations of Secondary Flow in River Confluences. In Water (Vol. 13, Issue 14). https://doi.org/10.3390/w13141917
  16. Shishesaz, M., & Hosseini, M. (2020). Effects of joint geometry and material on stress distribution, strength and failure of bonded composite joints: an overview. The Journal of Adhesion, 96(12), 1053–1121. https://doi.org/10.1080/00218464.2018.1554483
  17. Suherman Mukti, Erzi Agson Gani, Maykel Manawan, & Ansori. (2023). Determining The Ratio Of Pressure And Compressor Air Mass Flow Rate To Generate Thrust. International Journal Of Humanities Education and Social Sciences, 2(6 SE-Social Science). https://doi.org/10.55227/ijhess.v2i6.523
  18. Xu, W., Jin, Y., Zhu, L., & Li, Z. (2021). Performance Analysis of the Technology of High-Temperature Boiler Feed Water to Recover the Waste Heat of Mid-Low-Temperature Flue Gas. ACS Omega, 6(40), 26318–26328. https://doi.org/10.1021/acsomega.1c03465
  19. Yazıcıoğlu, A. G., Aradağ, S., Aylı, E., Gülben, G., & Kakaç, S. (2018). 4.2 Heat Exchangers (I. B. T.-C. E. S. Dincer (ed.); pp. 40–69). Elsevier. https://doi.org/https://doi.org/10.1016/B978-0-12-809597-3.00402-8
  20. Zhang, X., Ma, F., Yin, S., Wallace, C. D., Soltanian, M. R., Dai, Z., Ritzi, R. W., Ma, Z., Zhan, C., & Lü, X. (2021). Application of upscaling methods for fluid flow and mass transport in multi-scale heterogeneous media: A critical review. Applied Energy, 303, 117603. https://doi.org/https://doi.org/10.1016/j.apenergy.2021.117603