Pengaruh Parameter Pemotongan Proses CNC Wet Milling Stainless Steel AISI 316 Terhadap Kekasaran Permukaan
Abstract
Keywords
Full Text:
PDFReferences
Abbas, A. T., M. Abubakr, M. A. Hassan, M. Luqman, M. S. Soliman and H. Hegab (2020). "An adaptive design for cost, quality and productivity-oriented sustainable machining of stainless steel 316." Journal of Materials Research and Technology 9(6): 14568-14581.
Abbas, A. T., S. Anwar, E. Abdelnasser, M. Luqman, J. E. A. Qudeiri and A. Elkaseer (2021). "Effect of Different Cooling Strategies on Surface Quality and Power Consumption in Finishing End Milling of Stainless Steel 316." Materials (Basel) 14(4).
dos Santos Pereira, R., R. Droppa, M. C. Lopes de Oliveira and R. A. Antunes (2021). "Effect of Milling Parameters on the Stability of the Passive Film of AISI 304 Stainless Steel." Journal of Materials Engineering and Performance 30(11): 8131-8144.
Gutzeit, K., S. Basten, B. Kirsch and J. C. Aurich (2021). "Cryogenic Milling of Metastable Austenitic Stainless Steel Aisi 347." MM Science Journal 2021(5): 4962-4969.
Idris, K. and Rusiyanto (2020). "Pengaruh Parameter Pemotongan CNC Milling Dalam Pembuatan Pocket Terhadap Getaran Dan Kekasaran Permukaan Pada Crankcase Mesin Pemotong Rumput." Rekayasa Mesin 11(1): 41-49.
özdemir, M. (2019). "Optimization with Taguchi Method of Influences on Surface Roughness of Cutting Parameters in CNC Turning Processing." Mechanics 25(5): 397-405.
Setia, P. J., Yulianto and G. B. Aji (2020). "Optimasi Parameter Pemesinan Menggunakan Metode Taguchi Untuk Meningkatkan Kualitas Kebulatan Pada Pembubutan Internal Material S45C." Jurnal Infotekmesin 11(1): 31-36.
Singh, P., J. S. Dureja, H. Singh and M. S. Bhatti (2019). "Performance evaluation of coated carbide tool during face milling of AISI 304 under different cutting environments." Materials Research Express 6(5).
V.V.D.Sahithi, T.Malayadrib and N. Srilatha (2019). "Optimization Of Turning Parameters On Surface Roughness Based On Taguchi Technique." Materials Today: Proceedings 18: 3657-3666.
Yang, Y., Y. Gong, C. Li, X. Wen and J. Sun (2021). "Mechanical performance of 316 L stainless steel by hybrid directed energy deposition and thermal milling process." Journal of Materials Processing Technology 291.
Yuliarto, M. S. and R. Slamet (2020). "Analisa Pengaruh Variasi Putaran Mesin CNC Milling MCV-1100 Terhadap Sifat Mekanik Logam Aluminium AA 5052 - H112." Majalah Ilmiah Momentum 16(2): 122-126.
Yuliarto, M. S., R. Slamet and N. Agung (2020). "Variasi Jenis Pahat Terhadap Tingkat Kekerasan Dan Kekasaran Permukaan Baja ST 41 Pada Proses Bubut CNC HJ-28." Majalah Ilmiah Momentum 16(1): 25-29.
DOI: http://dx.doi.org/10.36499/jim.v18i2.7134
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Address : :
Fakultas Teknik Universitas Wahid Hasyim
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.